Choose a suitable position in your wardrobe and check whether there is enough space for the attachment.

Position ease-c® at the bottom mounting hole and ensure that it aligns with an existing hole in the wardrobe.

Insert the bottom screw through the bottom hole of ease-c® and the existing hole in the wardrobe.

Use a Phillips screwdriver to tighten the screw hand-tight.

Position ease-c® at the top mounting hole and ensure it aligns with an existing hole in the wardrobe. Make sure there's a gap between the bottom and top screw connections.

Place the top screw through the top hole of ease-c® and the existing hole in the wardrobe.

Use a Phillips screwdriver to tighten the screw by hand.

Attach the cover caps by pressing them into the screw holes by hand.

Note: Finally, check that ease-c® is securely and firmly mounted in the wardrobe before using it.

If you want to install ease-c® in multiple configurations in your wardrobe, make sure to leave a hole between the screw connections. Place ease-c® either above or below an existing ease-c® and repeat steps 1-4.

Insert the belt into ease-c® with the belt buckle facing forward. Hold the belt buckle in place. With your other hand, grasp the end of the belt and twist the belt slightly to ensure a secure fit in ease-c®.

Thanks to the innovative design, you can even store small belts in ease-c®. When rolled up compactly, even small belts lie securely in ease-c®.

For example, if you have belts with large buckles, or if the belt is much larger than ease-c® when rolled up, you can simply choose a wider attachment distance. Leave two holes free between the attachment points to create a larger diameter. Completely tailored to your individual style!